REXROTH R902241663 MOTOR DE EMBOLOS AXIALES
A6VM107
$5.067,05
Stock Limitado
solo disponible bajo consulta
Especificaciones
- All-purpose high pressure motor
- Size 28 … 1000
- Nominal pressure up to 400 bar
- Maximum pressure up 450 bar
- Open and closed circuits
- Metric version
| Series (A6V) | Bent-axis design, variable |
|---|---|
| Operating mode (M) | Motor |
| Size (107) | Geometric displacement |
| Control device (HA2) | High-pressure related, positive control with pressure increase Δp = 100 bar |
| Pressure control/override (U2) | Override of the HA1 and HA2 controls electric, two-point U = 24 V |
| Connector for solenoids (P) | DEUTSCH - molded connector, 2-pin, without suppressor diode |
| Swivel angle sensor (0) | Without |
| Additional function (0) | Without additional function |
| Stroking time damping (4) | One-sided in inlet to large stroking chamber (HA) |
| Setting range for displacement (F) | moderate |
| Series (65) | Series 6, index 5 |
| Version of port and fastening threads (M) | Metric ports based on ISO 6149 with O-ring seal, metric fastening threads according to DIN 13 |
|---|---|
| Direction of rotation (W) | Viewed on drive shaft, bidirectional |
| Seal Material (V) | FKM (fluorocarbon rubber) |
| Drive shaft bearing (0) | Standard bearing |
| Mounting flange (P4) | ISO 3019-2 160-4 |
| Drive shaft (Z9) | Splined shaft DIN 5480 W40×2×18×9g |
| Working port (2) | SAE working ports A and B at side, opposite |
| Valve (0) | Without valve |
| Speed sensor (0) | Without speed sensor |
| Standard/special version (0) | Standard version |