Especificaciones
Parker F12 hydraulic motor series has operating pressures up to 480 bar (7,000 psi) and speeds up to 7.300 rpm. The F12 motor is a robust design motor, and can be used in numerous applications in both open and closed loop circuits. Sizes from 30-250cc.
Peso | 77Kg |
---|
Body Material | Cast Iron | ||
Charge Pump Included | NO | ||
Configuration | Single | ||
Energy Recovery Capability | YES | ||
For Fluid Type | Standard Hydraulic Fluid | ||
Maximum Flow Rate | 363 L/min, 95.83 Gal/min | ||
Maximum Operating Pressure | 480 bar, 6960 psi | ||
Maximum Operating Speed | 3150 RPM | ||
Minimum Kinematic Viscosity | 8 cSt/ 37.3 SUS SUS | ||
Media | HYDRAULIC | ||
Port Connection | SAE | ISO | BSPP | ||
Port Location | Side Ports | Rear Ports | Opposing Ports | Configurable | ||
Direction of Rotation | Clockwise | Counter Clockwise | Bi-Rotational | ||
Shaft Type | SAE | ISO | |
Drain Option | YES | ||
Circuit Path | OPEN | ||
Control Method | NO | ||
Filter Included | NO | ||
Maximum Displacement | 14.76 inch3/rev, 242 (cm3/rev) cm3/rev | ||
Maximum Noise Level | 88 dBA | ||
Radial Load Capacity | 1900 kg, 4180 lb | ||
Maximum Kinematic Viscosity | 1000 cSt /4664 SUS SUS | ||
Weight | 169.4 lb (Max), 77 kg kg (Max) | ||
Mounting Option | SAE | ISO | CETOP | CARTRIDGE | ||
Port Type | FLANGE | ||
Pump Type | Fixed, PISTON | ||
Sensor Type | Speed | Rotation | ||
Thru-Drive Capability | NO |