REXROTH PG
49 Productos
Descubre todas las configuraciones disponibles para la serie de produtos REXROTH PG Internal gear pump, fixed displacement, gap-compensated, Internal gear pump, fixed displacement, gap compensated. Encuentra el producto correcto filtrando por Series, Type, Frane sizes, Component Series, Sizes, Directions of rotation, Drive shafts, Line connections, Seals y Mounting flange.
Códigos del producto PG
| Serie | Formato de número de catálogo | Descripción |
|---|---|---|
| PG | PG-H- -2X- - - -07- -U2 | Internal gear pump, fixed displacement, gap-compensated |
| PG | PG-F- - - - - - -V- - | Internal gear pump, fixed displacement, gap compensated |
Códigos del producto para el catálogo PG,
PG-H- -2X- - - -07- -U2
| 001 | Series |
|---|---|
| PG | Internal gear pump, fixed displacement, gap-compensated |
| 002 | Type |
| H | High-pressure pump, peak pressure 350 bar |
| 003 | Frane sizes |
| 2 | BG2 |
| 3 | BG3 |
| 004 | Component Series |
| 2X | Component series 20 ... 29 (unchanged installation and connection dimensions) |
| 005 | Sizes |
| 005 | NG5 |
| 006 | NG6 |
| 008 | NG8 |
| 011 | NG11 |
| 013 | NG13 |
| 016 | NG16 |
| 006 | Directions of Rotation |
|---|---|
| R | Viewed on drive shaft clockwise |
| L | Viewed on drive shaft counterclockwise |
| 007 | Drive Shafts |
| E | Cylindrical shaft with fitting key, DIN 6885 |
| R | Splined shaft according to ISO 3019-1 16-4 9T 16/32DP |
| S | Splined shaft according to ISO 3019-1 19-4 11T 16/32DP |
| 008 | Line Connections |
| 07 | Suction and pressure port: SAE flange connection according to ISO 6162-1 |
| 009 | Seals |
| V | FKM seals and FKM shaft seal ring, suitable for HLP, HETG, HEES and HFD hydraulic fluids |
| W | FKM seals with NBR shaft seal rings, suitable for HFC hydraulic fluids |
| 010 | Mounting Flange |
| U2 | 2-hole mounting flange according to ISO 3019-1 |
Códigos del producto para el catálogo PG,
PG-F- - - - - - -V- -
| 001 | Series |
|---|---|
| PG | Internal gear pump, fixed displacement, gap compensated |
| 002 | Type |
| F | Medium-pressure pump, maximum pressure 250 bar |
| 003 | Frame size (BG) |
| 1 | BG1 |
| 2 | BG2 |
| 3 | BG3 |
| 004 | Component Series |
| 2X | Series 20 to 29 (20 to 29: unchanged installation and port dimensions) - BG1, BG2 |
| 3X | Series 30 to 39 (30 to 39: unchanged installation and port dimensions) - BG3 |
| 005 | Size NG |
| 1,7 | 1.7 (BG1) |
| 2,2 | 2.2 (BG1) |
| 2,8 | 2.8 (BG1) |
| 3,2 | 3.2 (BG1) |
| 4,1 | 4.1 (BG1) |
| 5,0 | 5.0 (BG1) |
| 006 | 6.3 (BG2) |
| 008 | 8.0 (BG2) |
| 011 | 11.0 (BG2) |
| 013 | 13.0 (BG2) |
| 016 | 16.0 (BG2) |
| 019 | 19.0 (BG2) |
| 022 | 22.0 (BG2) |
| 020 | 20.0 (BG3) |
| 025 | 25.0 (BG3) |
| 032 | 32.0 (BG3) |
| 040 | 40.0 (BG3) |
| 006 | Direction of rotation |
|---|---|
| R | Viewed on drive shaft clockwise |
| L | Counter-clockwise |
| 007 | Drive shaft |
| A | Parallel keyed shaft, ISO 3019-2 |
| E | Parallel keyed shaft, ISO 3019-2 with through drive |
| J | Splined shaft to SAE J744 with involute tooth system according to ANSI B92.1a |
| N | Two surfaces for open-jaw coupling |
| L | Two surfaces for open-jaw coupling with through drive |
| O | Tapered shaft 1:5 with through drive |
| 008 | Line connections |
| 01 | Line thread according to ISO 228-1 |
| 07 | Suction and pressure port according to SAE J518 |
| 20 | Square flange port, metric fastening thread |
| 009 | Seal material |
| V | FKM (fluor-caoutchouc) |
| 010 | Mounting flange |
| K4 | Special flange according to ISO 7653-1985 (for truck auxiliary drive) |
| E4 | 4-hole mounting flange according to ISO 3019-2 and VDMA 24560 Part 1 |
| U2 | 2-hole mounting flange according to ISO 3019-1 |
| M | 2-hole mounting flange, spigot diameter 32 mm (BG1), spigot diameter 52 mm (BG2 and BG3) |
| P | 2-hole mounting flange, spigot diameter 50 mm |
| P1 | 2-hole mounting flange, spigot diameter 45.24 mm |
| P2 | 2-hole mounting flange, spigot diameter 63 mm |
| 011 | Optional |
| N | Feeder valve |
| K | Cover for mounting the next frame size down |