| A | 56 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 38 mm ±0.05 | ||
| M1 | 11 | ||
| O1 (ISO 4762-8.8) | M6x30 | ||
| T (For general requirements.) | 150 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 6 | mm | |
| V | 6 | mm |
| e | 37 | ||
| m | 8,30 | ||
| N | 11 | mm | |
| O2 (ISO 4762-8.8 oder ISO 4017-8.8, only applicable for bolting with steel or cast iron threads. ) | M6x16 | ||
| T | 9,60 | mm | |
| U2 (DIN 125) | 6 | mm |
| m | 4,10 | kg |
