| ra max - Max shaft & housing fillet radius | 1,5 mm | ||
| Ce - Min length fro Sleeve | 5 mm | ||
| da min - Min shoulder diameter IR | 49 mm | ||
| BSF - Characteristic rolling element frequency | 4,943 Hz | ||
| BPFI - Characteristic inner ring frequency | 8,328 Hz | ||
| Tmax - Max operating temperature | 200 °C | ||
| Nlim - Mechanical Limit Speed | 7400 tr/min | ||
| Y2 - Upper axial load coefficient | 2,79 | ||
| Y0 - Static axial load coefficient | 1,83 | ||
| Cu - Fatigue limit load | 18,5 kN | ||
| C - Dynamic load | 169 kN | ||
| Associated sleeve reference | H2308 | ||
| b - Groove width | 6 mm | ||
| rs - Min fillet radius | 1,5 mm | ||
| Brand | SNR |
| Da max - Max shoulder diameter OR | 81 mm | ||
| db - Min diameter for Sleeve | 45 mm | ||
| da max - Max shoulder diameter IR | 0 mm | ||
| FTF - Characteristic cage frequency | 0,405 Hz | ||
| BPFO - Characteristic outer ring frequency | 5,672 Hz | ||
| Tmin - Min operating temperature | -40 °C | ||
| Nref - Reference thermal speed | 5800 tr/min | ||
| Y1 - Lower axial load coefficient | 1,87 | ||
| e - Coefficient | 0,36 | ||
| C0 - Static load | 152 kN | ||
| Radial clearance class | C4 Special | ||
| k - Hole diameter | 3 mm | ||
| Number of lubrication holes | 3 | ||
| D1 - Inner diameter outer ring | 77 mm |
