| Guidance rib diameter of inner ring | d1 | 84,80 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1,50 | mm |
| Distance between the apexes of the pressure cones | a | 24 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 2 | mm |
| Maximum fillet radius of shaft | ra max | 2 | mm |
| Maximum diameter of housing shoulder | Da max | 101 | mm |
| Maximum diameter of shaft shoulder | da max | 69 | mm |
| Minimum axial space | Ca min | 5,50 | mm |
| Minimum diameter of shaft shoulder | db min | 69 | mm |
| Thermal speed rating | nϑr | 3,900 | |
| Fatigue load limit, radial | Cur | 21,000 | |
| Basic dynamic load rating, radial | Cr | 126,000 | |
| Width, outer ring | B | 24 | mm |
| Outside diameter | D | 110 | mm |
| Limiting speed | nG | 5,280 | |
| Basic static load rating, radial | C0r | 169,000 | |
| Width, total | T | 29,75 | mm |
| Width, inner ring | Bi | 28 | mm |
| Bore diameter | d | 60 | mm |
