| Bore diameter | d | 800 | mm |
| Width | B | 115 | mm |
| Basic static load rating, radial | C0r | 2,900,000 | |
| Limiting speed | nG | 810 | 1/min |
| Outside diameter | D | 1,060 | |
| Basic dynamic load rating, radial | Cr | 1,040,000 | |
| Fatigue load limit, radial | Cur | 55,000 | |
| Reference speed | nϑr | 430 | 1/min |
| Minimum diameter of shaft shoulder | da min | 823 | mm |
| Maximum diameter of housing shoulder | Db max | 1,047.6 | |
| Maximum fillet radius of housing | ra1 max | 2,50 | mm |
| Maximum diameter of housing shoulder | Da max | 1,037 | |
| Maximum fillet radius of shaft | ra max | 5 | mm |
| Minimum chamfer dimension | rmin | 3 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 85 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 964 | mm |
| Distance between the apexes of the pressure cones | a | 326 | mm |
