| Basic static load rating, radial | C0r | 1,470 | |
| Outside diameter | D | 26 | mm |
| Basic dynamic load rating, radial | Cr | 4,100 | |
| Limiting speed for grease lubrication | nG Grease | 67,000 |
| Bore diameter | d | 10 | mm |
| Width | B | 8 | mm |
| Fatigue load limit, radial | Cur | 155 | N |
| Limiting speed for oil lubrication | nG Oil | 100,000 |
| Diameter shaft shoulder | da | 14 | mm |
| Shoulder diameter outer ring | Da | 22 | mm |
| Maximum recess radius | ra max | 0,10 | mm |
| Maximum diameter injection pitch | Etk max | 16,80 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 15,70 | mm |
| Distance between the apexes of the pressure cones | a | 6,40 | mm |
| Minimum chamfer dimension | rmin | 0,30 | mm |
| Contact angle | α | 15 | ° |
| Fabricante | Referencia |
|---|---|
| SNR | 7000CJ74 |
| RHP | 7000CTRSULP3 |
| GAMET | B7000FA7CUL |
| NSK | 7000CTYSULP4 |
| Marlin-Rockwell Corp. | 100KRDS-BKE#7 |
| RHP | 7000CTSULP3 |
| Marlin-Rockwell Corp. | 100KRDS-ABEC7 |
| KOYO | 7000CPAGLFTP4 |
| SKF | 7000-CX-GA/P4A (SKF) |
| RHP | 7000X2.TAU.EP7 |
| RHP | 7000X2.TAUX.EP7 |
| SKF | 7000 CD-GA/P4A (SKF) |
| RHP | 7000CTRSULP4 |
| GPZ Bearings | 36100 |
| KOYO | 7000CGLFGP4 |
| Fafnir | 2MM9100WI-CRUL |
| RHP | 7000CTSULP4 |
| SNFA | EX10-7CE1-UL |
