| Bore diameter | d | 50 | mm |
| Width | B | 16 | mm |
| Basic static load rating, radial | C0r | 15,300 | |
| Limiting speed for grease lubrication | nG Grease | 16,000 |
| Outside diameter | D | 80 | mm |
| Basic dynamic load rating, radial | Cr | 27,500 | |
| Fatigue load limit, radial | Cur | 1,620 | |
| Limiting speed for oil lubrication | nG Oil | 24,000 |
| Diameter shaft shoulder | da | 56 | mm |
| Shoulder diameter outer ring | Da | 74 | mm |
| Maximum recess radius | ra max | 0,30 | mm |
| Maximum diameter injection pitch | Etk max | 62,30 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 59,30 | mm |
| Distance between the apexes of the pressure cones | a | 23,20 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Contact angle | α | 25 | ° |
| Fabricante | Referencia |
|---|---|
| NSK | 7010ETSULP4 |
| GMN | S6010ETAP4UL |
| SNR | 7010HVJ04 |
| RHP | 7010A5TRSULP3 |
| RHP | 7010X3.TAU.EP7 |
| Norma-Hoffmann Bearings | 7110-LB7U3 |
| RHP | 7010A5TRSULP4 |
| SKF | 7010 ACD-GA/P4A (SKF) |
| NTN | 7010T1G/GLP4 |
| Marlin-Rockwell Corp. | 7110KRDS-BKE#7 |
| NTN | 7010T1G/GLB9 |
| SNFA | EX50-7CE3-UL |
| Fafnir | 3MM9110WI-CRUL |
| IBC Waelzlager | 7010ETPAPA7UL |
| SKF | 7010ACDGA/PA9A |
| KOYO | 7010GLFGP4 |
| GPZ Bearings | 46110 |
| RHP | 7010ETSULP4 |
| Norma-Hoffmann Bearings | 7110 |
