| Design | Electric stopper cylinder | ||
| Mounting position | optional | ||
| Symbol | 995.845 | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Relative air humidity | 0 - 95% Non-condensing | ||
| Product weight | 420 g | ||
| Type of mounting | Via mounting kit | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material cover | PA PA-reinforced | ||
| Material housing | Hard anodised wrought aluminium alloy | ||
| Material screws | Coated steel | ||
| Nominal operating voltage DC | 24 V | ||
| Type of motor | Stepper motor | ||
| CE mark (see declaration of conformity) | To EU EMC Directive | ||
| Degree of protection | IP40 | ||
| Ready status indication | LED | ||
| Electrical connection for actuator, connection technology | M12x1, A-coded to EN 61076-2-101 | ||
| Electrical connection for sensor, connection type | Plugs | ||
| Electrical connection for sensor, number of pins/wires | 5 |
| Size | 20 | ||
| Position detection | With Hall sensor | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Storage temperature | -20 °C ... 60 °C | ||
| Cushioning length | 11,5 mm | ||
| Max. cycle frequency | 0,33 Hz | ||
| Approval | RCM trademark | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Material seals | NBR | ||
| Material piston rod | High-alloy stainless steel | ||
| Max. current consumption | 2.000 mA | ||
| Permissible voltage fluctuations | +/- 15% | ||
| KC mark | KC-EMV | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC | ||
| Max. cable length | 30 m | ||
| Electrical connection for actuator, connection type | Plugs | ||
| Electrical connection for actuator, number of pins/wires | 5 | ||
| Electrical connection for sensor, connection technology | M12x1, A-coded to EN 61076-2-101 |
