| Effective diameter of drive pinion | 18,46 mm | ||
| Size | 35 | ||
| Toothed-belt pitch | 2 mm | ||
| Guide | Plain-bearing guide Recirculating ball bearing guide | ||
| Type of motor | Stepper motor Servo motor | ||
| Max. acceleration | 50 m/s² | ||
| Repetition accuracy | ±0.1 mm | ||
| Degree of protection | IP20 | ||
| 2nd moment of area Iy | 3.770 mm⁴ | ||
| Max. drive torque | 0,46 Nm | ||
| Max. force Fz | 50 N | ||
| Max. feed force Fx | 50 N | ||
| Mass moment of inertia JH per metre of stroke | 0,026 kgcm² | ||
| Feed constant | 58 mm/U | ||
| Additional moving mass per 10 mm stroke | 0,31 g | ||
| Additional weight per 10 mm stroke | 25 g | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material pulleys | High-alloy stainless steel | ||
| Material toothed belt clamping piece | Beryllium bronze |
| Working stroke | 50 mm ... 800 mm | ||
| Toothed-belt stretch | 0,094 % | ||
| Mounting position | optional | ||
| Design | Electromechanical linear axis With toothed belt | ||
| Symbol | 991.212 | ||
| Max. speed | 0,9 m/s ... 3 m/s | ||
| Duty cycle | 100% | ||
| Ambient temperature | -10 °C ... 50 °C | ||
| 2nd moment of area Iz | 4.190 mm⁴ | ||
| Max. force Fy | 50 N | ||
| Max. idle running transfer resistance | 10,8 N | ||
| Frictional torque independent of load | 0,1 Nm | ||
| Mass moment of inertia JL per kg of working load | 0,85 kgcm² | ||
| Reference value operational performance | 5.000 km | ||
| Basic weight for 0 mm stroke | 1.470 g | ||
| Material profile | Wrought aluminium alloy Anodised | ||
| Material drive cover | Wrought aluminium alloy Anodised | ||
| Material slide | Wrought aluminium alloy Anodised | ||
| Material toothed belt | Polychloroprene with glass filament and nylon coating |
