| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 1,10 | mm |
| Distance between the apexes of the pressure cones | a | 28,20 | mm |
| Minimum diameter injection pitch | Etk min | 75,90 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 80,20 | mm |
| Maximum recess radius | ra max | 0,60 | mm |
| Shoulder diameter outer ring | Da | 93 | mm |
| Diameter shaft shoulder | da | 72 | mm |
| Limiting speed for oil lubrication | nG Oil | 26,000 | |
| Fatigue load limit, radial | Cur | 1,350 | |
| Basic dynamic load rating, radial | Cr | 18,200 | |
| Outside diameter | D | 100 | mm |
| Limiting speed for grease lubrication | nG Grease | 17,000 | |
| Basic static load rating, radial | C0r | 12,700 | |
| Width | B | 18 | mm |
| Bore diameter | d | 65 | mm |
| Fabricante | Referencia |
|---|---|
| SKF | 7013ACEGA/P4A |
| SNFA | VEX65-7CE3-UL |
| Fafnir | 3MMV99113WN-CRUL |
| RHP | T7013ETSULP3 |
| KOYO | ACH013CAGLFTP4 |
| SKF | 7013DBGA/P7 |
| SNFA | HX65-7CE3-UL |
