| Contact angle | α | 15 | ° |
| Minimum chamfer dimension | rmin | 1,10 | mm |
| Distance between the apexes of the pressure cones | a | 22,10 | mm |
| Minimum diameter injection pitch | Etk min | 82,30 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 87,50 | mm |
| Maximum recess radius | ra max | 0,60 | mm |
| Shoulder diameter outer ring | Da | 102 | mm |
| Diameter shaft shoulder | da | 77 | mm |
| Limiting speed for oil lubrication | nG Oil | 28,000 | |
| Fatigue load limit, radial | Cur | 1,820 | |
| Basic dynamic load rating, radial | Cr | 25,000 | |
| Outside diameter | D | 110 | mm |
| Limiting speed for grease lubrication | nG Grease | 18,000 | |
| Basic static load rating, radial | C0r | 17,200 | |
| Width | B | 20 | mm |
| Bore diameter | d | 70 | mm |
| Fabricante | Referencia |
|---|---|
| SNFA | VEX70-7CE1-UL |
| Fafnir | 2MMV9114HX-CRUL |
| SNFA | VEX70/S-7CE1-UL |
| RHP | T7014CTSULP3 |
| SNFA | HX70-7CE1-UL |
| SKF | 7014FBGA/P7 |
| SKF | 7014CEGA/P4A (SKF) |
| RHP | T7014CTSULP2 |
| KOYO | ACH014CGLFTP4 |
| Fafnir | 2MMV99114WN-CRUL |
