| BSF - Characteristic rolling element frequency | 12,029 Hz | ||
| BPFI - Characteristic inner ring frequency | 20,569 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Grease lubrication limit speed | 4500 tr/min | ||
| C0r - Static load rating | 42 kN | ||
| Radial clearance class | CN | ||
| Maximum tightening torque | 76 N-m | ||
| e - Inlet diameter of roller or washer | 32 mm | ||
| n - Axial lubrication hole diameter | 6 mm | ||
| B3 - Distance between washer face and radial lub hole | 8 mm | ||
| G - Stud thread designation | M18X1.5 | ||
| B1 - Total stud length | 58 mm | ||
| F - Under roller diameter | 22 mm | ||
| Brand | NTN |
| FTF - Characteristic cage frequency | 0,459 Hz | ||
| BPFO - Characteristic outer ring frequency | 17,431 Hz | ||
| Tmin - Min operating temperature | -20 °C | ||
| Track load capacity spherical outer ring | 3,85 kN | ||
| Cr - Dynamic load rating | 19,4 kN | ||
| Bearing with/without cage | Without | ||
| R - Track roller radius | 500 mm | ||
| a - Radial lubrication hole diameter | 3 mm | ||
| C1 - Distance between roller face and washer face | 0,8 mm | ||
| G1 - Thread length of the stud | 19 mm | ||
| B2 - Stud rod length | 36,5 mm | ||
| B - Bearing/Inner ring width | 19,5 mm | ||
| d1 - Stud diameter | 18 mm |
