| BSF - Characteristic rolling element frequency | 7,197 Hz | ||
| BPFI - Characteristic inner ring frequency | 13,068 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Grease lubrication limit speed | 2100 tr/min | ||
| C0r - Static load rating | 151 kN | ||
| Radial clearance class | CN | ||
| Maximum tightening torque | 360 N-m | ||
| h - Hexagonal hole | 8 mm | ||
| a - Radial lubrication hole diameter | 4 mm | ||
| C1 - Distance between roller face and washer face | 1 mm | ||
| G1 - Thread length of the stud | 32 mm | ||
| B2 - Stud rod length | 63 mm | ||
| B - Bearing/Inner ring width | 37 mm | ||
| d1 - Stud diameter | 30 mm |
| FTF - Characteristic cage frequency | 0,432 Hz | ||
| BPFO - Characteristic outer ring frequency | 9,932 Hz | ||
| Tmin - Min operating temperature | -20 °C | ||
| Track load capacity spherical outer ring | 11,4 kN | ||
| Cr - Dynamic load rating | 101 kN | ||
| Bearing with/without cage | Without | ||
| R - Track roller radius | 500 mm | ||
| e - Inlet diameter of roller or washer | 51 mm | ||
| n - Axial lubrication hole diameter | 8 mm | ||
| B3 - Distance between washer face and radial lub hole | 15 mm | ||
| G - Stud thread designation | M30X1.5 | ||
| B1 - Total stud length | 100 mm | ||
| F - Under roller diameter | 47,5 mm | ||
| Brand | NTN |
