Weight | 3.07970 lb | ||
resistance | noise resistance | ||
power supply voltage | 24 vdc (ripple ?10% or less) | ||
response time | 1 sec. or less | ||
temperature characteristics | ?2.0% f.s. or less (0 to 50c, based on 25c) | ||
repeatability | ?1.0% f.s. or less (0.7 mpa, at 20c), ?3.0% of f.s. or less in case of analog output | ||
accumulated flow range | 0 to 9,999,999,999 l | ||
proof pressure | 2.25 mpa | ||
note 2)display units | accumulated flow | ||
rated flow range note 1) | 150 to 3000 l/min | ||
measured fluid | dry air, nitrogen |
port size (rc, npt, g) | 1 | ||
Current consumption | 150 ma or less | ||
Hysteresis | hysteresis mode: variable (can be set from 0); window comparator mode: (can be set from 0 to 3% f.s.) | ||
output specifications | analog output note 5) | ||
pressure characteristics | ?1.5% f.s. or less (0.1 to 1.5 mpa, based on 0.7 mpa) | ||
linearity note 3) | ?1.5% f.s. or less (0.7 mpa, at 20c) | ||
pressure loss | 20 kpa (at maximum flow rate) | ||
operating pressure range | 0.1 to 1.5 mpa | ||
minimum set unit note 1) | 5 l/min | ||
detection type | heater type | ||
model | pf2a703h |