| A | 45 | mm | |
| H (Measured with gauging shaft, nominal dimension "d" and length about 50 mm. Up to 1,800 mm length with parallelism of 0.1 mm available upon request. ) | 26 mm ±0.1 | ||
| N | 9 | mm | |
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M5x16 | ||
| T | 6 | mm |
| e | 33 | ||
| m | 7 | ||
| O1 (DIN 6912-8.8) | M5x20 | ||
| T (For transverse loads on the Linear Bushing opening and when approaching maximum load.) | 100 | mm | |
| V | 5 | mm |
| m | 2,50 | kg |