| V | 46 | mm | |
| e | 63 | ||
| m | 19 | ||
| O1 (DIN 6912-8.8) | M12x45 | ||
| T (For general requirements.) | 300 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 12 | mm |
| A | 84 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 60 mm ±0.01 | ||
| N | 21 | mm | |
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M10x30 | ||
| T | 11,50 | mm | |
| V | 9 | mm |
| m | 19,40 | kg |