| A (Tolerance ISO 8062-3 - DCTG 11.) | 42 | mm | |
| A1 (Tolerance ISO 8062-3 - DCTG 11.) | 20 | mm | |
| D | 12 | mm | |
| H1 (Tolerance ISO 8062-3 - DCTG 11.) | 35 | mm | |
| S (Cylinder bolts ISO 4762-8.8) | 5,50 |
| e | 32 mm ±0.15 | ||
| B (Tolerance ISO 8062-3 - DCTG 11.) | 12 | ||
| H (In relation to nominal shaft dimension "d") | 20 mm ±0.01 | ||
| SW | 3 | ||
| V (Tolerance ISO 8062-3 - DCTG 11.) | 5,50 | mm |
| m | 0,06 | kg |
