| D | 90 | mm | |
| A (Tolerance ISO 8062-3 - DCTG 9.) | 160 | mm | |
| B1 | 95 | mm | |
| E2 | 65 mm ±0.25 | ||
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 8 - 26 |
||
| L | 125 | mm | |
| V (Tolerance ISO 8062-3 - DCTG 9.) | 15 | mm |
| A | 54 | mm | |
| B (Tolerance ISO 8062-3 - DCTG 9.) | 92 | ||
| E1 | 132 mm ±0.25 | ||
| H | 60 | mm | |
| H2 (Tolerance ISO 8062-3 - DCTG 9.) | 105 | mm | |
| S | 11 | ||
| W (Minimum size in relation to Ø d.) | 27,20 | mm |
| amax | 50 | m/s² | |
| m | 5,78 | kg | |
| Breakaway force | 48 | N | |
| Operating conditions | Operating conditions |
| vmax | 2 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 16 | N | |
| Shaft radial clearance h6 | + 50 + 5 |
||
| Permissible ambient temperature (min ... max) (for standard Linear Bushings without wiper seals) | -10 °C ... +100 °C |
