| Mounting position | optional | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Material collar screws | Galvanised steel | ||
| Material nut | Galvanised steel | ||
| Cushioning piston material | POM | ||
| Material piston rod wiper | TPE-U(PU) | ||
| Material piston | Wrought aluminium alloy | ||
| Material cover | Die-cast aluminium, coated | ||
| Pneumatic connection | G1/8 | ||
| Additional weight per 10 mm stroke | 27 g | ||
| Additional moving mass per 10 mm stroke | 9 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 483 N | ||
| Cushioning length | 17 mm | ||
| Ambient temperature | -20 °C ... 80 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Mode of operation | Double-acting | ||
| Variants | Piston rod at one end | ||
| Design | Piston Piston rod Profile barrel | ||
| Conforms to standard | ISO 15552 | ||
| Piston rod thread | M10x1.25 |
| Stroke | 1 mm ... 2.800 mm | ||
| Symbol | 00992970 | ||
| Material bearing | POM | ||
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
| Buffer seal material | TPE-U(PU) | ||
| Material piston rod | High-alloy steel | ||
| Material piston seal | TPE-U(PU) | ||
| Note on materials | RoHS-compliant | ||
| Type of mounting | Via female thread With accessories Either: | ||
| Basic weight for 0 mm stroke | 465 g | ||
| Moving mass for 0 mm stroke | 110 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
| Impact energy in end positions | 0,4 J | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Operating pressure | 0,6 bar ... 12 bar | ||
| Position detection | Via proximity switch | ||
| Piston-rod end | Male thread | ||
| Cushioning | Self-adjusting pneumatic end-position cushioning | ||
| Piston diameter | 32 mm |
