Festo 163430

DNC-80- -

$724,06 Stock Limitado solo disponible bajo consulta

Especificaciones

Conexion neumatica Stroke Operating Pressure Mounting Position
G3/8 3mm 12 bar optional
Material cylinder barrel Wrought aluminium alloy Smooth anodised
Note on materials RoHS-compliant
Type of mounting Via female thread With accessories
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 2.721 N
Impact energy in end positions 0,9 J
Corrosion resistance class CRC 2 - Moderate corrosion stress 3 - high corrosion stress
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Explosion ambient temperature -20°C <= Ta <= +60°C
Explosion ignition protection type for gas Ex h IIC T4 Gb
ATEX category gas II 2G
CE marking (see declaration of conformity) To UK EX instructions
Mode of operation Double-acting
Protection against torque/guide Square piston rod
Design Piston Piston rod Profile barrel
Cushioning Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends
Piston diameter 80 mm
Variants With end-position locking on both sides With end-position locking at rear With end-position locking at front Improved running performance Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with external hexagon Extended piston rod Clamping unit on the piston rod With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Temperature range -40 to 80°C Monostable valve, mounted on right, unactuated piston rod, retracted Monostable valve, mounted on right, unactuated piston rod, advanced Bistable valve, mounted on right, unactuated piston rod, retracted Monostable valve, mounted on left, unactuated piston rod, retracted Monostable valve, mounted on left, unactuated piston rod, advanced Bistable valve, mounted on left, unactuated piston rod, retracted Piston rod at one end
Material cover Die-cast aluminium Coated
Pneumatic connection G3/8
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 2.721 N ... 3.016 N
Max. torque for protection against torsion 3 Nm
Ambient temperature -40 °C ... 120 °C
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Explosion protection certification outside the EU EPL Db (GB) EPL Gb (GB)
Explosion ignition protection type for dust Ex h IIIC T120°C Db
ATEX category dust II 2D
Explosion protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
Operating pressure 12 bar
Position detection Via proximity switch Without
Mounting position optional
Based on standard ISO 15552
Stroke 3 mm ... 2.000 mm
$724,06
Stock Pedir cotización
Referencia 163430
Fabricante Festo
Unidades Precio / Unidad
1+ $724,06
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros