| Number of lubrication holes | 3 | ||
| D1 - Inner diameter outer ring | 253,7 mm | ||
| ra max - Max shaft & housing fillet radius | 2,5 mm | ||
| Ce - Min length fro Sleeve | 18 mm | ||
| da min - Min shoulder diameter IR | 174 mm | ||
| FTF - Characteristic cage frequency | 0,423 Hz | ||
| BPFO - Characteristic outer ring frequency | 7,606 Hz | ||
| Tmin - Min operating temperature | -40 °C | ||
| Nref - Reference thermal speed | 1400 tr/min | ||
| Y1 - Lower axial load coefficient | 2,03 | ||
| e - Coefficient | 0,33 | ||
| C0 - Static load | 1890 kN | ||
| Radial clearance class | C3 | ||
| k - Hole diameter | 7 mm |
| rs - Min fillet radius | 3 mm | ||
| Brand | NTN | ||
| Da max - Max shoulder diameter OR | 276 mm | ||
| db - Min diameter for Sleeve | 174 mm | ||
| BSF - Characteristic rolling element frequency | 6,152 Hz | ||
| BPFI - Characteristic inner ring frequency | 10,394 Hz | ||
| Tmax - Max operating temperature | 200 °C | ||
| Nlim - Mechanical Limit Speed | 2100 tr/min | ||
| Y2 - Upper axial load coefficient | 3,02 | ||
| Y0 - Static axial load coefficient | 1,98 | ||
| Cu - Fatigue limit load | 180 kN | ||
| C - Dynamic load | 1550 kN | ||
| Associated sleeve reference | H2332 | ||
| b - Groove width | 14,85 mm |
