| Guidance rib diameter of inner ring | d1 | 70,50 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1,50 | mm |
| Distance between the apexes of the pressure cones | a | 20 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 1,50 | mm |
| Maximum fillet radius of shaft | ra max | 1,50 | mm |
| Maximum diameter of housing shoulder | Da max | 83 | mm |
| Maximum diameter of shaft shoulder | da max | 58 | mm |
| Minimum axial space | Ca min | 4,50 | mm |
| Minimum diameter of shaft shoulder | db min | 57 | mm |
| Thermal speed rating | nϑr | 5,000 | |
| Fatigue load limit, radial | Cur | 11,500 | |
| Basic dynamic load rating, radial | Cr | 75,100 | |
| Width, outer ring | B | 17 | mm |
| Outside diameter | D | 90 | mm |
| Limiting speed | nG | 6,560 | |
| Basic static load rating, radial | C0r | 96,000 | |
| Width, total | T | 21,75 | mm |
| Width, inner ring | Bi | 20 | mm |
| Bore diameter | d | 50 | mm |
