| r1a - Max fillet radius | 3 mm | ||
| Cb - Min clearance | 22 mm | ||
| Db min - Min OR shoulder diameter | 323 mm | ||
| Da min - Min shoulder diameter OR | 282 mm | ||
| da max - Max shoulder diameter IR | 216 mm | ||
| FTF - Characteristic cage frequency | 0,432 Hz | ||
| BPFO - Characteristic outer ring frequency | 8,634 Hz | ||
| Tmin - Min operating temperature | -40 °C | ||
| Nlim - Oil lubrication limit speed | 1400 tr/min | ||
| Y0 - Static axial load coefficient | 0,76 | ||
| A2 - Rating life coefficient | 1 | ||
| C0 - Static load | 1850 kN | ||
| ISO 355 reference | T4GD190 | ||
| rs - Min fillet radius | 5 mm | ||
| T - Total width | 97 mm | ||
| Brand | NTN |
| ra max - Max fillet radius | 4 mm | ||
| Ca - Min clearance | 11 mm | ||
| Da max - Max shoulder diameter OR | 322 mm | ||
| db min - Min IR shoulder diameter | 212 mm | ||
| BSF - Characteristic rolling element frequency | 6,899 Hz | ||
| BPFI - Characteristic inner ring frequency | 11,366 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Grease lubrication limit speed | 1000 tr/min | ||
| Y2 - Upper axial load coefficient | 1,38 | ||
| e - Coefficient | 0,44 | ||
| Cu - Fatigue limit load | 169 kN | ||
| C - Dynamic load | 1480 kN | ||
| r1s - Min fillet radius | 4 mm | ||
| a - Charge load application point | 82 mm | ||
| C - Outer ring width | 75 mm |
