| a - Charge load application point | 25,1 mm | ||
| C - Outer ring width | 27 mm | ||
| r1a - Max fillet radius | 1,5 mm | ||
| Cb - Min clearance | 8 mm | ||
| Db min - Min OR shoulder diameter | 96 mm | ||
| Da min - Min shoulder diameter OR | 85 mm | ||
| da max - Max shoulder diameter IR | 62 mm | ||
| FTF - Characteristic cage frequency | 0,428 Hz | ||
| BPFO - Characteristic outer ring frequency | 8,138 Hz | ||
| Tmin - Min operating temperature | -40 °C | ||
| Nref - Reference thermal speed | 4300 tr/min | ||
| Y0 - Static axial load coefficient | 0,83 | ||
| Cu - Fatigue limit load | 24,1 kN | ||
| A2 - Rating life coefficient | 1 | ||
| ISO 355 reference | T3DE055 | ||
| rs - Min fillet radius | 2 mm |
| T - Total width | 35 mm | ||
| Brand | SNR | ||
| ra max - Max fillet radius | 2 mm | ||
| Ca - Min clearance | 6 mm | ||
| Da max - Max shoulder diameter OR | 91,5 mm | ||
| db min - Min IR shoulder diameter | 65 mm | ||
| BSF - Characteristic rolling element frequency | 6,601 Hz | ||
| BPFI - Characteristic inner ring frequency | 10,862 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Mechanical Limit Speed | 7000 tr/min | ||
| Y2 - Upper axial load coefficient | 1,50 | ||
| e - Coefficient | 0,40 | ||
| C0 - Static load | 198 kN | ||
| C - Dynamic load | 144 kN | ||
| r1s - Min fillet radius | 1,5 mm |
