| Basic dynamic load rating, radial | Cr | 71,000 | |
| Outside diameter | D | 125 | mm |
| Reference speed | nϑr | 5,500 | |
| Fatigue load limit, radial | Cur | 4,050 |
| Width | B | 24 | mm |
| Bore diameter | d | 70 | mm |
| Limiting speed | nG | 9,400 | |
| Basic static load rating, radial | C0r | 58,000 |
| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 92,32 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Distance between the apexes of the pressure cones | a | 53 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 104 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 119,40 | mm |
| Minimum diameter of shaft shoulder | da min | 79 | mm |
| Maximum fillet radius of shaft | ra max | 1,50 | mm |
| Maximum diameter of housing shoulder | Da max | 116 | mm |
