| pumps | servo controlled piston pump | ||
| input shaft rotation | l : left hand rotation (ccw) | ||
| output shaft | a : 9 tooth 16/32 internal, dia 15.88 [.625], accepts shaft ext 31.8 [1.25] | ||
| charge pump | 2 : 13.8 cm3/r [.84 in3/r] with 1.3125-12 un-2b sae o-ring port for suction inlet (s) | ||
| auxiliary port size and location | e : .750-16 unf-2b sae o-ring port - left (c1) & right (c2) sides (housing), both side plugged | ||
| main ports size and location | 1 : 1.3125-12 un-2b sae o-ring port (a & b) - right side | ||
| relief valve setting for main port b | t : 344.7 bar [5000 lbf/in2] | ||
| control assembly | m0 : manual control, no additional features | ||
| control supply orifice (p) | a : diameter 0.71 [.028] | ||
| special control options | 0 : no special control options | ||
| special features | 00 : no special features | ||
| design code | d : d |
| code title | aad : 40.6 cm3/r [2.48 in3/r] servo controlled variable displacement pump | ||
| input shaft | a : 15 tooth 16/32 external, dia 24.98 [.984], shaft ext 46 [1.81] | ||
| auxiliary mounting features (rear) | c : [2-bolt a] sae flange series 82-2, with cover plate | ||
| charge pump relief setting and routing | 4 : 17.24-20.68 bar [250-300 lbf/in2] relieved to case; 1.3125-12 un-2b sae o-ring port for charge pressure discharge (c3) (to remote filter), .875-14 unf-2b sae o-ring port for charge pressure inlet (c4) (return from filter) | ||
| drain port size and location | e : 1.0625-12 un-2b sae o-ring port - left (d1) & right (d2) sides, left side plugged; thru drain into rear auxiliary flange (d3) | ||
| relief valve setting for main port a | t : 344.7 bar [5000 lbf/in2] | ||
| Additional functions | a : bypass valve | ||
| destroke valve | 0 : not required | ||
| control servo orifice (s1 and s2) | 0 : no control servo orifice | ||
| paint | 0a : primer per spec 209-13a | ||
| identification | 0 : standard |
