Material cylinder barrel | Wrought aluminium alloy Smooth anodised | ||
Note on materials | RoHS-compliant | ||
Type of mounting | Via female thread With accessories | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1.682 N | ||
Impact energy in end positions | 0,5 J | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
ATEX category gas | II 2G | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
Mode of operation | Double-acting | ||
Protection against torque/guide | Square piston rod | ||
Position detection | Via proximity switch Without | ||
Mounting position | optional | ||
Based on standard | ISO 15552 | ||
Stroke | 3 mm ... 2.000 mm |
Material cover | Die-cast aluminium Coated | ||
Pneumatic connection | G3/8 | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1.682 N ... 1.870 N | ||
Max. torque for protection against torsion | 1,5 Nm | ||
Ambient temperature | -40 °C ... 120 °C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
ATEX category dust | II 2D | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Operating pressure | 0,15 bar ... 12 bar | ||
Variants | With end-position locking on both sides With end-position locking at rear With end-position locking at front Improved running performance Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with external hexagon Extended piston rod Clamping unit on the piston rod With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Temperature range -40 to 80°C Monostable valve, mounted on right, unactuated piston rod, retracted Monostable valve, mounted on right, unactuated piston rod, advanced Bistable valve, mounted on right, unactuated piston rod, retracted Monostable valve, mounted on left, unactuated piston rod, retracted Monostable valve, mounted on left, unactuated piston rod, advanced Bistable valve, mounted on left, unactuated piston rod, retracted Piston rod at one end | ||
Design | Piston Piston rod Profile barrel | ||
Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends | ||
Piston diameter | 63 mm |