| Inner diameter | Di | 8 | mm |
| Outside diameter of flange | Dfl | 15 | mm |
| Basic dynamic load rating, radial | Cr | 3,920 | |
| Basic dynamic load rating, axial | Ca | 8,910 |
| Outer diameter | Do | 10 | mm |
| Width | B | 5,50 | mm |
| Basic static load rating, radial | C0r | 7,000 | |
| Basic static load rating, axial | C0a | 15,900 |
| Flange thickness | sfl | 1 | mm |
| Outer chamfer | f | 0,60 | mm |
| Inner edge break, min. | Fi min | 0,10 | mm |
| Outside diameter of flange, upper tolerance | Dfl OT | 0,50 | mm |
| Outside diameter of flange, lower tolerance | Dfl UT | -0,50 | mm |
| Width, upper tolerance | BOT | 0,25 | mm |
| Flange thickness, upper tolerance | sfl OT | 0,05 | mm |
| Outer chamfer, upper tolerance | fOT | 0,40 | mm |
| Radius, max. | Rmax | 1 | mm |
| Inner edge break, max. | Fi max | 0,60 | mm |
| Wall thickness | s3 | 1 | mm |
| Outside diameter, upper tolerance | Do OT | 0,06 | mm |
| Outside diameter, lower tolerance | Do UT | 0,03 | mm |
| Width, lower tolerance | BUT | -0,25 | mm |
| Flange thickness, lower tolerance | sfl UT | -0,20 | mm |
| Outer chamfer, lower tolerance | fUT | -0,40 | mm |
