| Material spindle | Steel | ||
| Material slide | Wrought aluminium alloy Anodised | ||
| Material guide slide | Steel | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material end cap | Wrought aluminium alloy Anodised | ||
| Dynamic deflection (moving load) | 0.05% of the axis length, max. 0.5 mm | ||
| Weight of additional slide | 3.600 g | ||
| Feed constant | 10 mm/U | ||
| Mass moment of inertia JL per kg of working load | 0,025 kgcm² | ||
| Torsional mass moment of inertia It | 247.000 mm⁴ | ||
| Max. radial force at drive shaft | 500 N | ||
| My at theoretical life value of 100 km (only guide consideration) | 2.502 Nm | ||
| Max. moment Mz | 680 Nm | ||
| Max. moment Mx | 104 Nm | ||
| Fy at theoretical life value of 100 km (only guide consideration) | 20.240 N | ||
| Max. force Fy | 5.500 N | ||
| Idle torque at vmax | 1,33 Nm | ||
| 2nd moment of area Iy | 1.240.000 mm⁴ | ||
| Degree of protection | IP40 | ||
| Max. speed | 0,6 m/s | ||
| Max. acceleration | 15 m/s² | ||
| Symbol | 991.211 | ||
| Type of motor | Stepper motor Servo motor | ||
| Guide | Recirculating ball bearing guide | ||
| Spindle pitch | 10 mm/U | ||
| Stroke reserve | 0 mm | ||
| Working stroke | 200 mm |
| Material spindle nut | Steel | ||
| Material guide rail | Steel | ||
| Material drive cover | Wrought aluminium alloy Anodised | ||
| Material profile | Wrought aluminium alloy Anodised | ||
| Static deflection (load in standstill) | 0.1% of the axis length | ||
| Additional weight per 10 mm stroke | 101 g | ||
| Moving mass | 4.459 g | ||
| Mass moment of inertia JO | 1,038 kgcm² | ||
| Mass moment of inertia JH per metre of stroke | 2,756 kgcm² | ||
| Max. feed force Fx | 3.400 N | ||
| Mz at theoretical life value of 100 km (only guide consideration) | 2.502 Nm | ||
| Mx at theoretical life value of 100 km (only guide consideration) | 383 Nm | ||
| Max. moment My | 680 Nm | ||
| Fz at theoretical life value of 100 km (only guide consideration) | 25.355 N | ||
| Max. force Fz | 6.890 N | ||
| Idle torque at vmin | 1 Nm | ||
| 2nd moment of area Iz | 3.800.000 mm⁴ | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Repetition accuracy | ±0.02 mm | ||
| Max. rotational speed | 3.600 rpm | ||
| Functional principle of measuring system | Incremental | ||
| Spindle type | Ball screw | ||
| Design | Electromechanical linear axis With ball screw | ||
| Mounting position | optional | ||
| Spindle diameter | 25 mm | ||
| Size | 120 |
