| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing, tolerance | dT | H7 | |
| Thread length external thread | l1 | 32 | mm |
| Width of the rod end | C1 | 12 | mm |
| Thread size | d3 | M12 | |
| Ball diameter | dK | 22,23 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Radial Clearance | Gr | 0 - 0,035 | |
| Tilt angle | α | 13 | ° |
| Shank Length External thread rod | h | 54 | mm |
| Outer flange diameter inner ring | d1 | 15,40 | mm |
| Edge Spacing | r1smin | 0,30 | mm |
| Basic static load rating, radial | C0r | 20,800 | |
| Width inner ring | B | 16 | mm |
| Outside diameter bearing | D | 26 | mm |
| Bore diameter bearing | d | 12 | mm |
| Basic dynamic load rating, radial | Cr | 24,000 | |
| Total length external thread rod | l2 | 70 | mm |
| Outer eye diameter | d2 | 32 | mm |
| Fabricante | Referencia |
|---|---|
| Durbal | BEM12-20-501 |
| IKO | POS12-EC (IKO) |
| SKF | SAKB12-F (SKF) |
| Askubal | KA12-D |
| WSW Wälzlager | SAK12C |
| SKF | SAKAB12T |
| Elges | GAKFR12PW |
| Hirschmann | SMCP12 |
