| Width inner ring, lower tolerance | BUT | -0,20 | mm |
| Outside diameter, lower tolerance | Do UT | -0,02 | mm |
| Edge Spacing | r1smin | 1 | mm |
| Ball diameter | dK | 130 | mm |
| Radial Clearance | Gr | 0,085 - 0,165 | |
| Bore diameter bearing, lower tolerance | dUT | -0,02 | mm |
| Tilt angle | α | 7 | ° |
| Width Outer ring | C | 55 | mm |
| Connection measure Inner ring | da max | 109,50 | mm |
| Basic static load rating, radial | C0r | 2,900,000 | |
| Width inner ring | B | 70 | mm |
| Bore diameter bearing | d | 100 | mm |
| Basic dynamic load rating, radial | Cr | 754,000 | |
| Outside diameter bearing | D | 150 | mm |
| Fabricante | Referencia |
|---|---|
| SKF | GE100 ES (SKF) |
