| Outside diameter bearing | D | 42 | mm |
| Width inner ring | B | 20 | mm |
| Basic dynamic load rating, radial | Cr | 128,000 |
| Bore diameter bearing | d | 25 | mm |
| Width Outer ring | C | 16 | mm |
| Basic static load rating, radial | C0r | 213,000 |
| Edge Spacing | r1smin | 0,60 | mm |
| Connection measure Inner ring | da max | 29,30 | mm |
| Ball diameter | dK | 35,50 | mm |
| Radial Clearance | Gr | 0 - 0,05 | |
| Outside diameter, lower tolerance | Do UT | -0,01 | mm |
| Tilt angle | α | 7 | ° |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Fabricante | Referencia |
|---|---|
| WSW Wälzlager | GE25ET-2RS |
| RBC | MB25-FSS |
| SKF | GE25TE-2RS |
| Hung | GE25HW-A |
