| Inner diameter bearing | d | 35 | mm |
| Height | T | 28 | mm |
| Basic static load rating, axial | C0a | 1,300,000 |
| Outside diameter bearing | D | 90 | mm |
| Basic dynamic load rating, axial | Ca | 259,000 |
| Edge Spacing | r1smin | 0,30 | mm |
| Connection measure Inner ring | da max | 66 | mm |
| Ball diameter | dK | 98 | mm |
| Front surface diameter of shaft washer | d3 | 66 | mm |
| Width Outer ring | C | 20 | mm |
| Distance lubrication Bore | A | 8 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Height, lower tolerance | TUT | -0,40 | mm |
| Connection measure Inner ring | d2 | 84 | mm |
| Width Inner ring | B | 22 | mm |
| Plane Surface Spacing | s | 22 | mm |
| Tilt angle | α | 6 | ° |
| Outside diameter, lower tolerance | Do UT | -0,02 | mm |
| Width inner ring, lower tolerance | BUT | -0,24 | mm |
