| Height | T | 36,50 | mm |
| Bore diameter bearing | d | 45 | mm |
| Basic dynamic load rating, axial | Ca | 1,460,000 |
| Outside diameter bearing | D | 120 | mm |
| Basic static load rating, axial | C0a | 2,430,000 | |
| Width inner ring | B | 31 | mm |
| Width inner ring, lower tolerance | BUT | -0,24 | mm |
| Outside diameter, lower tolerance | Do UT | -0,02 | mm |
| Tilt angle | α | 6 | ° |
| Width Outer ring | C | 25 | mm |
| Outer eye diameter | d2 | 112 | mm |
| Height, lower tolerance | TUT | -0,40 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Plane Surface Spacing | s | 27,50 | mm |
| Front surface diameter of shaft washer | d3 | 89 | mm |
| Ball diameter | dK | 130 | mm |
| Connection measure Inner ring | da max | 89 | mm |
| Edge Spacing | r1smin | 0,30 | mm |
| Fabricante | Referencia |
|---|---|
| SKF | GX45 F (SKF) |
