| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Width Across Flat | W | 22 | mm |
| Distance drilling with/shaft start | l7 | 23 | mm |
| Total length internal thread head | l4 | 85 | mm |
| Tilt angle | α | 15 | ° |
| Shank Length Internal thread head | h1 | 64 | mm |
| Thread size | d3 | M16 | |
| Outer flange diameter inner ring | d1 | 19,30 | mm |
| Bore diameter bearing, tolerance | dT | H7 | |
| Radial Clearance | Gr | 0 - 0,035 | |
| Shank diameter, large | d5 | 28 | mm |
| length rod end shank | l5 | 8 | mm |
| Thread length Internal thread | l3 | 28 | mm |
| Width of the rod end | C1 | 15 | mm |
| Shank diameter | d4 | 22 | mm |
| Outer eye diameter | d2 | 42 | mm |
| Ball diameter | dK | 28,58 | mm |
| Edge Spacing | r1smin | 0,30 | mm |
| Basic static load rating, radial | C0r | 45,200 | |
| Width inner ring | B | 21 | mm |
| Bore diameter bearing | d | 16 | mm |
| Basic dynamic load rating, radial | Cr | 39,000 | |
| Outside diameter bearing | D | 32 | mm |
| Fabricante | Referencia |
|---|---|
| SKF | SILKB16 F (SKF) |
