| Basic dynamic load rating, radial | Cr | 2,470 | |
| Outside diameter | D | 26 | mm |
| Limiting speed for oil lubrication | nG Oil | 140,000 | |
| Fatigue load limit, radial | Cur | 99 | N |
| Width | B | 8 | mm |
| Bore diameter | d | 10 | mm |
| Limiting speed for grease lubrication | nG Grease | 90,000 | |
| Basic static load rating, radial | C0r | 940 | N |
| Contact angle | α | 15 | ° |
| Minimum chamfer dimension | rmin | 0,30 | mm |
| Distance between the apexes of the pressure cones | a | 6,40 | mm |
| Minimum diameter injection pitch | Etk min | 15,30 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 16,90 | mm |
| Maximum recess radius | ra max | 0,10 | mm |
| Shoulder diameter outer ring | Da | 22 | mm |
| Diameter shaft shoulder | da | 14 | mm |
| Fabricante | Referencia |
|---|---|
| SNFA | VEX10-7CE1-UL |
| GMN | SM6000CTAP4UL |
| Fafnir | 2MMV9100HX-CRUL |
| GMN | KH6000CTAP4UL |
| RHP | S7000X2.TAUL.EP7 |
