| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 1,10 | mm |
| Distance between the apexes of the pressure cones | a | 25,90 | mm |
| Minimum diameter injection pitch | Etk min | 65,90 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 70,30 | mm |
| Maximum recess radius | ra max | 0,60 | mm |
| Shoulder diameter outer ring | Da | 83 | mm |
| Diameter shaft shoulder | da | 62 | mm |
| Limiting speed for oil lubrication | nG Oil | 30,000 | |
| Fatigue load limit, radial | Cur | 1,150 | |
| Basic dynamic load rating, radial | Cr | 16,900 | |
| Outside diameter | D | 90 | mm |
| Limiting speed for grease lubrication | nG Grease | 20,000 | |
| Basic static load rating, radial | C0r | 10,900 | |
| Width | B | 18 | mm |
| Bore diameter | d | 55 | mm |
| Fabricante | Referencia |
|---|---|
| KOYO | ACH011CAGLFTP4 |
| SKF | 7011ACEGA/P4A |
| Fafnir | 3MMV99111WN-CRUL |
| RHP | T7011ETSULP3 |
| SNFA | VEX55-7CE3-UL |
| SKF | 7011DBGA/P7 |
| SNFA | HX55-7CE3-UL |
