| Guidance rib diameter of inner ring | d1 | 40,30 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1,30 | mm |
| Distance between the apexes of the pressure cones | a | 11 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 3,60 | mm |
| Maximum fillet radius of shaft | ra max | 3,60 | mm |
| Maximum diameter of housing shoulder | Da max | 45 | mm |
| Maximum diameter of shaft shoulder | da max | 33,50 | mm |
| Minimum axial space | Ca min | 3 | mm |
| Minimum diameter of shaft shoulder | db min | 40 | mm |
| Limiting speed | nG | 14,700 | |
| Basic static load rating, radial | C0r | 32,500 | |
| Width, total | T | 14,22 | mm |
| Width, inner ring | Bi | 14,73 | mm |
| Bore diameter | d | 29 | mm |
| Fatigue load limit, radial | Cur | 3,600 | |
| Basic dynamic load rating, radial | Cr | 26,000 | |
| Width, outer ring | B | 10,67 | mm |
| Outside diameter | D | 50,29 | mm |
