| Guidance rib diameter of inner ring | d1 | 53 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1,30 | mm |
| Distance between the apexes of the pressure cones | a | 13 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 3,60 | mm |
| Maximum fillet radius of shaft | ra max | 3,60 | mm |
| Minimum diameter of shaft shoulder | db min | 49 | mm |
| Minimum axial space | Ca min | 4 | mm |
| Maximum diameter of shaft shoulder | da max | 42,50 | mm |
| Limiting speed | nG | 11,200 | |
| Basic static load rating, radial | C0r | 60,000 | |
| Width, total | T | 18,03 | mm |
| Width, inner ring | Bi | 18,29 | mm |
| Bore diameter | d | 38,10 | mm |
| Fatigue load limit, radial | Cur | 7,100 | |
| Basic dynamic load rating, radial | Cr | 45,000 | |
| Width, outer ring | B | 13,97 | mm |
| Outside diameter | D | 65,09 | mm |
