| Fit diameter of roller stud / stud | d1 | 10 | mm |
| Speed on permanent grease lubrication | nD G | 8,000 | |
| Basic static load rating, radial | C0r | 6,500 | |
| Width of the roller stud | B | 36 | mm |
| Outside diameter | D | 26 | mm |
| Fatigue load limit, radial | Cur | 860 | N |
| Basic dynamic load rating, radial | Cr | 5,100 |
| Radius of outer ring outside profile | R | 500 | mm |
| Thread length | IG | 12 | mm |
| Stop diameter of thrust washer | d2 | 17,50 | mm |
| Protrusion outer ring to thrust washer | C1 | 0,60 | mm |
| Bolt/stud length effectively | B2 | 23 | mm |
| Width of flats | W | 5 | mm |
| Thread | M10X1 | ||
| Minimum chamfer dimension | rmin | 0,30 | mm |
| Width, outer ring | C | 12 | mm |
| Maximum witdh of thrust washer | B1 | 13,20 | mm |
| Fabricante | Referencia |
|---|---|
| SKF | KR26-X (SKF) |
| IKO | CF10-1-B (IKO) |
| IKO | CF10-1-BM (IKO) |
| IKO | CF10-1-M (IKO) |
| IKO | CF10-1 |
| Jalman Precision | CF10-1 |
| Jalman Precision | CFA10-1 |
| NSK | FCJ-26 |
| NSK | FCJB-26 |
| Koyo | KM10-1M |
| NTN | KR26FXH |
| SKF | KR26XB |
| NTN | KR26XY |
| McGill Manufacturing | MCFR-26-BX |
| SKF | NAKD26P |
| McGill Manufacturing | MCFR-26-X |
