| ra max - Max shaft & housing fillet radius | 0,3 mm | ||
| Db max - Max OR shoulder diameter | 21,5 mm | ||
| db min - Min IR shoulder diameter | 14,5 mm | ||
| BSF - Characteristic rolling element frequency | 7,11 Hz | ||
| BPFI - Characteristic inner ring frequency | 8,441 Hz | ||
| Nlim - Grease lubrication limit speed | 75000 tr/min | ||
| Tmin - Min operating temperature | -20 °C | ||
| Axial rigidity | 51 N/µm | ||
| Preload level | 9 | ||
| f0 - Coefficient | 8,01 | ||
| C0 - Static load | 0,62 kN | ||
| r1s - Min fillet radius | 0,3 mm | ||
| α - Contact angle | 25 ° | ||
| D2 - Inner diameter outer ring | 20,75 mm | ||
| Brand | SNR |
| r1a - Max fillet radius | 0,3 mm | ||
| Da max - Max shoulder diameter OR | 21,5 mm | ||
| da min - Min shoulder diameter IR | 14,5 mm | ||
| FTF - Characteristic cage frequency | 0,437 Hz | ||
| BPFO - Characteristic outer ring frequency | 6,559 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Radial rigidity | 103 N/µm | ||
| Preload value | 0,07 kN | ||
| Axial displacement K Factor | 1,21 | ||
| Cu - Fatigue limit load | 0,07 kN | ||
| C - Dynamic load | 1,41 kN | ||
| rs - Min fillet radius | 0,3 mm | ||
| a - Charge load application point | 7 mm | ||
| D1 - Inner diameter outer ring | 20,05 mm |
