Material insulating sheath | TPE-E | ||
Product weight | 5.000 g | ||
Electrical connection 1, design | Round | ||
Electrical connection 1, cable outlet | Straight | ||
Electrical connection 1, number of connections/cores | 8 | ||
Electrical connection 1, connection pattern | 995.662 | ||
Electrical connection 2, connection type | Cable | ||
Electrical connection 2, number of connections/cores | 8 | ||
Operational voltage range DC | 0 V ... 630 V | ||
Operational voltage range AC | 0 V ... 630 V | ||
Current rating at 40°C | 22 A | ||
Immunity to surge | 4 kV | ||
Cable length | 15 m | ||
Bending radius, fixed cable | ≥ 70 mm | ||
Cable diameter | 14 mm | ||
Nominal cross section conductor | 0,75 mm² | ||
Degree of protection | IP65 | ||
Ambient temperature | -50 °C ... 90 °C | ||
CE mark (see declaration of conformity) | To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
LABS (PWIS) conformity | VDMA24364-B2-L | ||
Pollution degree | 3 | ||
Material cable sheath | TPE-U(PUR) |
Cable designation | Without inscription label holder | ||
Electrical connection 1, function | Field device side | ||
Electrical connection 1, connection type | Socket | ||
Electrical connection 1, connector system | M40x1.5 | ||
Electrical connection 1, used connections/cores | 8 | ||
Electrical connection 2, function | Controller side | ||
Electrical connection 2, connector system | Open end | ||
Electrical connection 2, used connections/cores | 8 | ||
Note on operational voltage range DC | 0 - 300 V for conductor cross section 0.75 mm² | ||
Note on operational voltage range AC | 0 - 300 V for conductor cross section 0.75 mm² | ||
Note on permissible current load at 40°C | 12 A for conductor cross section 0.75 mm² | ||
Note on immunity to surge | 2.5 kV for conductor cross section of 0.75 mm² | ||
Cable characteristic | Suitable for energy chains | ||
Bending radius, moving cable | ≥ 140 mm | ||
Cable structure | 4 x 2.5 mm² + 2 x (2 x 0.75 mm²) Shielded | ||
Wire ends | Wire end sleeve to DIN 46228-A..-10 Wire end sleeve to DIN 46228-E..-10 | ||
Note on degree of protection | In assembled state | ||
Ambient temperature with moving cable | -40 °C ... 90 °C | ||
CE marking (see declaration of conformity) | To UK regulations for electrical equipment To UK RoHS instructions | ||
Note on materials | RoHS-compliant | ||
Corrosion resistance class CRC | 0 - No corrosion stress | ||
Cable sheath colour | Orange |