model | pf2d200/201 | ||
flow rate measurement range note 1) | 0.25 to 4.50 l/min | ||
minimum set unit note 1) | 0.05 l/min | ||
note 1)display units | accumulated flow | ||
power supply voltage | 24 vdc (ripple ?10% or less) (with power supply polarity protection) | ||
power supply voltage for sensor | same as [power supply voltage] | ||
sensor input | 1 to 5 vdc (input impedance: approx. 800k ) | ||
Hysteresis | hysteresis mode: variable (can be set from 0), window comparator mode: fixed (3-digits) | ||
linearity note 4) | ?5% f.s. or less | ||
temperature characteristics | ?2% f.s. or less (0 to 50c, based on 25c) | ||
status led?s | illuminates when output is on out1: red | ||
connection | power supply / output connection: 8p connector, sensor connection: 4p connector (e-con) | ||
Weight | .62322 lb |
applicable flow rate sensor | pf2d504- -1 | ||
set flow rate range note 1) | 0.25 to 4.50 l/min | ||
accumulated pulse flow rate exchange value (pulse width: 50ms) note 1) | 0.05 l/pulse | ||
accumulated flow range note 1) | 0 to 999999 l, 0 to 999999 gal(us) | ||
Current consumption | 55 ma or less (not including the current consumption of the sensor) | ||
power supply current for sensor note 2) | max. 110 ma (however, the total current for the 4 inputs is 440 ma maximum or less.) | ||
output note 3)specifications | output protection | ||
response time note 4) | 1s or less | ||
repeatability note 4) | ?3% f.s. or less | ||
display method | for measured value display: 4-digits, 7-segment led (orange) for channel display: 1-digit, 7-segment led (red) | ||
resistance | noise resistance | ||
Material | housing: pbt, display: pet, backside rubber: cr |