REXROTH PG
46 Productos
Descubre todas las configuraciones disponibles para la serie de produtos REXROTH PG Internal gear pump, fixed displacement, gap-compensated, Internal gear pump, fixed displacement, gap compensated. Encuentra el producto correcto filtrando por Serie, Tipo, Tamaños de marco, Serie de Componentes, Tamaños, Direcciones de rotación, Ejes de transmisión, Conexiones de línea, Juntas y Brida de fijación.
Códigos del producto PG
| Serie | Formato de número de catálogo | Descripción |
|---|---|---|
| PG | PG-H- -2X- - - -07- -U2 | Internal gear pump, fixed displacement, gap-compensated |
| PG | PG-F- - - - - - -V- - | Internal gear pump, fixed displacement, gap compensated |
Códigos del producto para el catálogo PG,
PG-H- -2X- - - -07- -U2
| 001 | Series |
|---|---|
| PG | Internal gear pump, fixed displacement, gap-compensated |
| 002 | Type |
| H | High-pressure pump, peak pressure 350 bar |
| 003 | Frane sizes |
| 2 | BG2 |
| 3 | BG3 |
| 004 | Component Series |
| 2X | Component series 20 ... 29 (unchanged installation and connection dimensions) |
| 005 | Sizes |
| 005 | NG5 |
| 006 | NG6 |
| 008 | NG8 |
| 011 | NG11 |
| 013 | NG13 |
| 016 | NG16 |
| 006 | Directions of Rotation |
|---|---|
| R | Viewed on drive shaft clockwise |
| L | Viewed on drive shaft counterclockwise |
| 007 | Drive Shafts |
| E | Cylindrical shaft with fitting key, DIN 6885 |
| R | Splined shaft according to ISO 3019-1 16-4 9T 16/32DP |
| S | Splined shaft according to ISO 3019-1 19-4 11T 16/32DP |
| 008 | Line Connections |
| 07 | Suction and pressure port: SAE flange connection according to ISO 6162-1 |
| 009 | Seals |
| V | FKM seals and FKM shaft seal ring, suitable for HLP, HETG, HEES and HFD hydraulic fluids |
| W | FKM seals with NBR shaft seal rings, suitable for HFC hydraulic fluids |
| 010 | Mounting Flange |
| U2 | 2-hole mounting flange according to ISO 3019-1 |
Códigos del producto para el catálogo PG,
PG-F- - - - - - -V- -
| 001 | Series |
|---|---|
| PG | Internal gear pump, fixed displacement, gap compensated |
| 002 | Type |
| F | Medium-pressure pump, maximum pressure 250 bar |
| 003 | Frame size (BG) |
| 1 | BG1 |
| 2 | BG2 |
| 3 | BG3 |
| 004 | Component Series |
| 2X | Series 20 to 29 (20 to 29: unchanged installation and port dimensions) - BG1, BG2 |
| 3X | Series 30 to 39 (30 to 39: unchanged installation and port dimensions) - BG3 |
| 005 | Size NG |
| 1,7 | 1.7 (BG1) |
| 2,2 | 2.2 (BG1) |
| 2,8 | 2.8 (BG1) |
| 3,2 | 3.2 (BG1) |
| 4,1 | 4.1 (BG1) |
| 5,0 | 5.0 (BG1) |
| 006 | 6.3 (BG2) |
| 008 | 8.0 (BG2) |
| 011 | 11.0 (BG2) |
| 013 | 13.0 (BG2) |
| 016 | 16.0 (BG2) |
| 019 | 19.0 (BG2) |
| 022 | 22.0 (BG2) |
| 020 | 20.0 (BG3) |
| 025 | 25.0 (BG3) |
| 032 | 32.0 (BG3) |
| 040 | 40.0 (BG3) |
| 006 | Direction of rotation |
|---|---|
| R | Viewed on drive shaft clockwise |
| L | Counter-clockwise |
| 007 | Drive shaft |
| A | Parallel keyed shaft, ISO 3019-2 |
| E | Parallel keyed shaft, ISO 3019-2 with through drive |
| J | Splined shaft to SAE J744 with involute tooth system according to ANSI B92.1a |
| N | Two surfaces for open-jaw coupling |
| L | Two surfaces for open-jaw coupling with through drive |
| O | Tapered shaft 1:5 with through drive |
| 008 | Line connections |
| 01 | Line thread according to ISO 228-1 |
| 07 | Suction and pressure port according to SAE J518 |
| 20 | Square flange port, metric fastening thread |
| 009 | Seal material |
| V | FKM (fluor-caoutchouc) |
| 010 | Mounting flange |
| K4 | Special flange according to ISO 7653-1985 (for truck auxiliary drive) |
| E4 | 4-hole mounting flange according to ISO 3019-2 and VDMA 24560 Part 1 |
| U2 | 2-hole mounting flange according to ISO 3019-1 |
| M | 2-hole mounting flange, spigot diameter 32 mm (BG1), spigot diameter 52 mm (BG2 and BG3) |
| P | 2-hole mounting flange, spigot diameter 50 mm |
| P1 | 2-hole mounting flange, spigot diameter 45.24 mm |
| P2 | 2-hole mounting flange, spigot diameter 63 mm |
| 011 | Optional |
| N | Feeder valve |
| K | Cover for mounting the next frame size down |