Especificaciones
Lubricación | Peso |
---|---|
No initial lubrication | 4.522g |
D | 120 | mm | |
C1 | 133,30 | H13 | |
D1 | 114 | mm |
C | 165 | mm | |
C2 | 4,15 |
amax | 50 | m/s² | |
m | 4,70 | kg | |
Breakaway force (One wiper seal: Multiply by a factor of 0.5.) | 45 | N | |
Rows of balls | 6 | ||
Shaft radial clearance h6 (Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. ) | + 37 + 8 |
||
Permissible ambient temperature (min ... max) (Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. ) | -10 °C ... +80 °C |
vmax | 2 | m/s | |
FR (One wiper seal: Multiply by a factor of 0.5.,Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 15 | N | |
m (Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. ) | 0,001 ... 0,004 | ||
Working bore diameter tolerance | + 24 + 2 |
||
Operating conditions | Operating conditions |
Stock | 50+ uds. |
---|---|
Referencia | R060208010 |
Fabricante | Rexroth |
Unidades | Precio / Unidad |
---|---|
1 - 4 | $306,64 |
5 - 9 | $300,50 |
10 - 14 | $294,37 |
15+ | $288,24 |