| A | 60 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 42 mm ±0.05 | ||
| M1 | 14 | ||
| O1 (ISO 4762-8.8) | M8x35 | ||
| T (For transverse loads on the Linear Bushing opening and when approaching maximum load, as well as when dimensional accuracy is strictly required. ) | 120 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 8 | mm | |
| V | 6 | mm |
| e | 42 | ||
| m | 10,80 | ||
| N | 15 | mm | |
| O2 (ISO 4762-8.8 oder ISO 4017-8.8, only applicable for bolting with steel or cast iron threads. ) | M6x16 | ||
| T | 11 | mm | |
| U2 (DIN 125) | 6 | mm |
| m | 5,90 | kg |
