| V | 50 | mm | |
| e | 55 | ||
| m | 15 | ||
| O1 (DIN 6912-8.8) | M10x40 | ||
| T (For general requirements.) | 300 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 10 | mm |
| A | 73 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 50 mm ±0.01 | ||
| N | 19 | mm | |
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M8x25 | ||
| T | 9,50 | mm | |
| V | 8 | mm |
| m | 12,80 | kg |