| Nominal size | 25 | ||
| Friction coefficient μ | 0,002 ... 0,003 | ||
| Permissible ambient temperature | -10 °C ... +80 °C | ||
| Maximum permissible linear speed vmax | 5 m/s | ||
| Max. acceleration amax | 500 m/s² | ||
| Static longitudinal moment load capacity ML0 | 740 Nm | ||
| Dynamic longitudinal moment load capacity ML | 530 Nm | ||
| Dynamic torsional moment load capacity Mt | 530 Nm | ||
| Dynamic load capacity C | 37300 N | ||
| Height of runner block with guide rail | 36 mm | ||
| Length of runner block | 107.9 mm | ||
| Self-aligning for compensation of misalignments | Without self-alignment | ||
| Preload class | C1 moderate preload | ||
| Format | FLS - flanged, long, standard height |
| Footnote friction coefficient μ | Without friction of seal | ||
| Footnote permissible ambient temperature (min ... max) | 100 °C admissible for short time. For operation at negative temperatures, please consult us. | ||
| Static load rating C0 | 52500 N | ||
| Footnote amax | If Fcomb◡ |
||
| Static torsional moment load capacity Mt0 | 750 Nm | ||
| Dynamic longitudinal moment load capacity ML footnote | Determination of the dynamic load capacities and load moments is based on a 100 000 m travel as per DIN ISO 14728-1. Often only 50 000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.26. | ||
| Dynamic torsional moment load capacity Mt footnote | Determination of the dynamic load capacities and load moments is based on a 100 000 m travel as per DIN ISO 14728-1. Often only 50 000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.26. | ||
| Footnote dynamic load capacity C | Determination of the dynamic load capacities and load moments is based on a 100 000 m travel as per DIN ISO 14728-1. Often only 50 000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.26. | ||
| Lubrication | With preservation and without initial lubrication | ||
| Height of runner block | 29.9 mm | ||
| Width of runner block | 70 mm | ||
| Accuracy class | N – Standard | ||
| Material (profiled rail systems) | Carbon steel |
